Epoxy Resin Adhesive Glue Water for Ceramic Tile Installation
|FOB Price:||US $4,200-5,000 / Ton|
|Min. Order:||1 Ton|
|Min. Order||FOB Price|
|1 Ton||US $4,200-5,000/ Ton|
|Payment Terms:||L/C, T/T|
- Model NO.: SHINDAH-164963
- Morphology: Water Emulsion
- Material: Polyester
- Main Agent Composition: Natural Polymer
- Promoter Composition: Emulsifier
- Color: Yellow
- Transport Package: Pallet
- Origin: China
- Bonding Function: Instant Adhesive
- Application: Construction
- Classification: Room Curing
- Characteristic: Waterproof
- Composition: Inorganic Material
- Trademark: wall lover
- Specification: 5kg
- HS Code: 3506919090
1. New type Patent Tile Ahedisve
2. super strong adhesion, 3.3Mpa, 100% no hollow & falling-off problems, 100% safe applied in building external wall with ceramic tile, marble tile.
3. pave immediately after brush, no need wait it dry.
4. good permeability with cement
5. using quantity 80-120g per m2
6. paving cost 25% of traditional tile adhesive.
7. water-based, non-toxic, environmental friendly.
8. applied in building external wall and room wall/floor paved with ceramic tile, marble tile, vitrified tile/bricks, man-made tile, archaize brick, Mosaic, natual stone ect
it also can be used to pave ceramic tiles on ceramic tiles when renovate house/old buildings
It is single component, water-based, non-toxic, environmental friendly adhesive, with super strong adhesion, water resistant and high & low temperature resistant. Most important, it can follow the stress when there is thermal expansion and contraction and impact force. Therefore, using this type ceramic tile can effectively solve the hollow, falling-off problems.
Specially used in backside of hard brick stone, such as Vitrified tiles, ceramic tile, archaize brick, Mosaic, marble, man-made stone, natural stone etc. which are with high density, low water absorption hard brick stone tile.
Wall Lover Has good permeability and waterproof performance, can fully vitrified brick surface, and blend suspected soil infiltration, significantly improve the bonding strength on the surface (5-8 times). Effectively prevent the brick falling off. It is the best choice to decorate the wall, brick, floor tile and the back of marble.
|Implementation standard||jc/t 907-2002|
|Environmental standard||gb 18583-2008|
Apply to the surface treatment of concrete, wall tile, floor tile, marble, glass, etc.
Polymer resin, synthetic fiber, concrete enhancer, additive and water.
The surface should be firm, no deformable agent, floating ash and oil stained, and the wall besmear is brushed evenly, one time is ok.
1 kg WL - 168 can be coated in 8 to 12 square meters.
Storage and transport:
dry, ventilated, avoid light, environmental temperature is higher than 5 ºC.
1. This product shall not be used in combination with other solvents and esters.
2. If touched, Wash your eyes, mouth and skin with water.
3. The product can permeate the substrate rapidly, and the coating one time.
4. Winter transport and storage, keep warm, avoid the product freeze and spoil.
welcome to inquire.