This product is no longer promoted on Made-in-China.com. If you find any infringement or
sensitive information of it, please contact
us for
handling. Thank you.
Advantages: 1. New type Patent Tile Ahedisve 2. super strong adhesion, 3.3Mpa, 100% no hollow & falling-off problems, 100% safe applied in building external wall with ceramic tile, marble tile. 3. pave immediately after brush, no need wait it dry. 4. good permeability with cement 5. using quantity 80-120g per m2 6. paving cost 25% of traditional tile adhesive. 7. water-based, non-toxic, environmental friendly. 8. can be used to pave ceramic tiles on ceramic tiles whenrenovate house/old buildings
It is single component, water-based, non-toxic, environmental friendly adhesive, with super strong adhesion, water resistant and high & low temperature resistant. Most important, it can follow the stress when there is thermal expansion and contraction and impact force. Therefore, using this type ceramic tile can effectively solve the hollow, falling-off problems.
Specially used in backside of hard brick stone, such as Vitrified tiles, ceramic tile, archaize brick, Mosaic, marble, man-made stone, natural stone etc. which are with high density, low water absorption hard brick stone tile.
Wall Lover Agent Has good permeability and waterproof performance, can fully vitrified brick surface, and blend suspected soil infiltration, significantly improve the bonding strength on the surface (5-8 times). Effectively prevent the brick falling off. It is the best choice to decorate the wall, brick, floor tile and the back of marble.
Implementation standard
jc/t 907-2002
Environmental standard
gb 18583-2008
Bonding strength/MPa
3.3
Temperature/ºC
>5
Usage: Apply to the surface treatment of concrete, wall tile, floor tile, marble, glass, etc.
Main ingredients: Polymer resin, synthetic fiber, concrete enhancer, additive and water.
Basic processing: The surface should be firm, no deformable agent, floating ash and oil stained, and the wall besmear is brushed evenly, one time is ok.
Consumption: 1 kg WL - 168 can be coated in 8 to 12 square meters.
Storage and transport: dry, ventilated, avoid light, environmental temperature is higher than 5 ºC.
Note: 1. This product shall not be used in combination with other solvents and esters. 2. If touched, Wash your eyes, mouth and skin with water. 3. The product can permeate the substrate rapidly, and the coating one time. 4. Winter transport and storage, keep warm, avoid the product freeze and spoil.